R & W provides the widest range of couplings for servo precision shaft to shaft connection. Some of the product offerings are shown below. R&W provides torque limiters, bellows couplings, economy bellows, miniature bellows, line shafts, elastomer couplings and linear couplings.

R & W has been ISO 9001 certified for the production of precision couplings.

The metal bellows coupling is the center of development at R & W. The integration of the metal bellows in a new development has produced a coupling with high torsion stiffness and the ability to equalize shaft misalignment.

Compact and Backlash-free

For 0.1-2,500Nm for shaft diameter 4-70mm
single-position, multi-position re-engagement
multi-position, load holding or full disengagement

• Compact simple design
• Stiff, backlash-free design
• Low moment of inertia
• Low residual friction after disengagement
• Disengage in milliseconds
  

Flexible and torsionally rigid

For 15-10,000 Nm for shaft diameter 10-180mm

• High dynamic servo axis
• Absolutely backlash free
• Easy to assemble, press-fit available
• Speeds up to 50,000 RPM
• Compensate for misalignment
• Low moment of inertia

Versatile and precise

For .05-10 Nm for shaft diameter 1-28 mm
with standard balancing up to 20,000 RPM

• High dynamic servo axis
• Absolutely backlash free
• Easy to assemble, press-fit available
• Economy types available
• Low restoring forces
• For all measuring and control systems

Reliable and low cost

For 2-500 Nm for shaft diameter 4-62 mm

• Quality: leading in cost-effectiveness
• Friction clamped connection
• low moment of inertia

Wear and maintenance-free

For 10- 4,000 Nm for shaft diameter 10-100 mm

• Easy to assemble and disassemble
• standard lengths up to 6 meters
• No intermediate support
• High compensation for misalignment
• Intermediate tube on cardanic bearings
• Low moment of inertia

Precise and Compact

For 10-1,100 Nm for shaft diameter 5-60 mm

• Vibration absorbing
• Electrically insulating
• backlash-free
• Press fit design
• Compensation for misalignment

Zero axial backlash

For 70-800 Nm for threads M5-M12

• Compact design
• Low dead weight
• High Acceleration rates
• Low lateral restoring forces
• For high tensile and compression forces
• Compensation for lateral misalignment